Custom Designer Art Toy — Watertight Resin STL from Photo

From 2D concept to resin collectible

This AI-generated designer art toy is optimized directly from a 2D product photo. The pipeline uses Hunyuan3D 2.1 to reconstruct the geometry, followed by an aggressive mesh repair step. The result is a perfectly manifold, watertight mesh ready for your slicer.

We eliminate the guesswork of printing organic shapes. The model is pre-hollowed with a 1.5 mm wall thickness, saving expensive ABS-like resin while maintaining structural integrity during the peel cycle.

Technical mesh and slicer specifications

The 29.4 MB binary STL handles intricate surface details with a dense vertex count, typically between 10K and 500K triangles. Two 2.5 mm drainage holes are strategically placed at the lowest point near the build plate. This prevents the dreaded suction cup effect and ensures uncured liquid escapes freely.

Print orientation and support settings

Designed for MSLA and DLP printers. Slice at a 0.05 mm layer height for flawless, photorealistic finishes. Supports are auto-generated for any overhang exceeding 45 degrees. The orientation is tilted backward to minimize support contact area on the focal points.

For FDM users, scale the model up. Switch to a 0.2 mm layer height and use 15% infill to successfully handle internal bridging.