Watertight Chibi Anime Monster STL for Resin and FDM Printing

Chibi proportions and print optimization

This adorable anime-inspired monster features classic chibi proportions. The oversized head and simplified limbs translate perfectly to the build plate. Thanks to automated mesh repair, the 37.4 MB STL binary is entirely manifold. It contains zero self-intersecting geometry.

For filament users, keep a standard 0.2 mm layer height with 15% infill. The orientation is carefully optimized to minimize the need for complex bridging across the character's ears and limbs. Auto-generated supports are only required for severe overhangs exceeding 45 degrees.

Resin-ready hollowing and mesh specs

Generated via Hunyuan3D 2.1, this triangulated mesh sits comfortably in the 10K to 500K vertex count range. To save liquid material on MSLA printers, the model is designed for hollowing with a sturdy 1.5 to 2.0 mm wall thickness. A pre-calculated 2.5 mm drainage hole placed at the lowest point prevents suction cup failures during the peel cycle.

Tabletop deployment and slicer setup

Ideal for miniature painters and tabletop gamers needing a cute proxy figure. Drop the file directly into your Chitubox or Phrozen slicer. Set your resin layer height to 0.05 mm to capture every smooth, kawaii detail without extending print times unnecessarily. The optimized support contact area ensures a clean finish with minimal sanding required.